The Phallosan Forte is an incredible penis traction device that can lead to actual penis enlargement. In order to get these results, you need to properly use the Phallosan Forte. To help with this, I have created this guide on how to use the Phallosan Forte with pictures.
I have used the Phallosan Forte for over a year with phenomenal results. I have gained over 1 1/2 inches in penis length and an inch in penis circumference. If you want to see my size gains including picture documentation, check out Phallosan Forte Before and After Pictures: My Amazing Uncensored Results.
If you want to read the complete review of the Phallosan Forte, check out my Phallosan Forte Review. This review includes the science behind penis traction devices including a number of scientific studies. This review also goes into why this device is so much better than other penis traction devices.
Now let’s go on to taking a good look at how to use the Phallosan Forte. Proper use is essential to getting the best results from this incredible device.
Warning: This post contains nudity in regards to showing the use of the Phallosan Forte. Continue only if you are of legal age and willing to see these pictures.
Table of Contents
How to Use the Phallosan Forte With Pictures: Step-by-step and uncensored
The Phallosan Forte may seem a little daunting at first because of all of the different parts. Once you put it on a couple of times, it will all be second nature and you will be able to put it on in a couple of seconds. To help get to that point, here is a step-by-step guide on how to use the Phallosan Forte with pictures.
1. How to Use the Phallosan Forte: Pick the Correct Sized Bell
The first step in how to use the Phallosan Forte is to pick the proper bell size. The Phallosan Forte kit contains three different-sized bells. Pick the smallest-sized bell that you can easily fit over the tip of the penis.
2. Pick the Correct Sized Sleeve
For proper Phallosan Forte use, you need to pick the largest sleeve size that still snugly fits the shaft of the penis. The Phallosan Forte kit includes a sizing template to help pick out the appropriate size.
3. Place the Sleeve on the Bell
The next step in Phallosan Forte’s use is to place the appropriately sized sleeve onto the appropriately sized bell. The sleeve has a groove that fits around the lip of the bell.
4. Putting on the Glans Protection Cap
Start by placing the protector cap over the head of the penis. Stretch the cap out from side to side and place it over the penis glans and down along the shaft.
This protects the penis head from damage from the vacuum of the device. I personally prefer not to use this part of the device as I keep the vacuum and tension very low on the device. When you first start out or if you use a lot of vacuum and tension, you would want to use the protector cap.
5. Roll the Sleeve Up and Onto the Bell
Connect the Phallosan Forte pump to the top of the bell. It will only go the correct way so don’t worry about messing it up. Roll the end of the sleeve up towards the bell. Once it no longer rolls, then fold the sleeve up and over the edge of the bell.
Next, attach the tension clip to the bell right below where the vacuum pump connects (Please excuse the black tape on the tension clip in the picture. It is for another project that I am working on.).
6. Placing the Bell on the Penis
The next step in how to use the Phallosan Forte is putting the bell onto the penis.
Set the Phallosan Forte to the pump position. This is done by having the tab pointing towards the middle symbol between the locked and unlocked positions. Insert the penis tip into the bell.
7. Roll the Sleeve down
The next step in Phallosan Forte use is to get the sleeve onto the penis shaft. Roll the sleeve down off the bell and onto the shaft of the penis. Roll the sleeve all the way out on the penis shaft like a condom. This will hold the device onto the penis even without the vacuum.
8. Use the Pump to Create Suction
This is an important step in how to use the Phallosan Forte. You want to create a vacuum on the bell to hold everything in place but you do not want to overdo it.
Pump the vacuum pump a few times (I only do it twice). Then move the vacuum pump so that the green marker is aligned with the vacuum lock symbol.
9. Put on the Tension Belt
Place the white foam ring on the belt over the penis and connect the eyelet at the end of the belt to the eyelet at the end of the tension clip.
10. Adjust the Tension
This is probably the most important step in how to use the Phallosan Forte. You want to apply tension onto the device but it is important to keep it at a comfortable level. Remember that this needs to be comfortable enough to wear for at least six hours per day.
The Phallosan Forte is now all connected. You can adjust the tension by loosening or tightening the adjustable belt. I have found a good working tension to be right at the very beginning of the yellow zone of tension. This is not enough tension to be painful or uncomfortable but enough to get the job done.
Important Things to Remember About Phallosan Forte Use
We are all eager for results but you need to remember the most important thing about Phallosan Forte use is that you do not want to go overboard. If you feel pain, that means that you need to ease up and place less stress on the penis.
If you notice that your erectile function begins to diminish at all, stop using the Phallosan Forte and rest your penis until your erectile function returns fully. When you start back up use less tension on the device.
Remember that you want to be able to use this device consistently for at least six hours per day over the course of several months. You should see results within a month or two but results will continue to improve over the course of several months.
Related Posts
What Works for Weight Loss and Energy
PrimeGENIX DIM 3X Review Is It Legit
What works for Erection Quality:
Review of The Phoenix Acoustic Wave Therapy Device for Erection Quality